Wicks & Wick Selection
Wick Trimming & Flame Maintenance
Exposed wick length directly sets the capillary fuel surface area—a few extra millimeters can turn a calm flame into a smoking torch.
Exposed wick length directly sets the capillary fuel surface area—a few extra millimeters can turn a calm flame into a smoking torch.
01. Why 6 mm (1/4 Inch) Matters
An overly long wick exposes extra braided cotton saturated with molten wax to radiant heat, accelerating fuel vaporization faster than ambient oxygen can oxidize it. That excess vapor produces black soot and carbon mushrooms.
Before initial packaging and before every consumer lighting, trim cotton wicks cleanly to ~5–6 mm (3/16–1/4 in), and wooden wicks per manufacturer height (commonly ~3–5 mm) after removing spent brittle char.
Common mistakes
- Cutting wicks too short (< 3 mm), which starves the flame and causes wick drowning.
- Leaving snipped carbon wick fragments sitting on the wax surface.
Safety considerations
- Always clear all trimmed debris out of the vessel before relighting.
Frequently asked questions
Should a maker pre-trim wicks before shipping finished candles?
Yes—deliver finished candles pre-trimmed to optimal starting length so the customer’s very first lighting burns safely right out of the box.