Pour TheoryUnderstand the Science. Master the Craft.

Wicks & Wick Selection

Wick Sizing Principles

Manufacturer sizing charts provide only a starting baseline—true wick sizing must always be validated empirically in your finished formulation.

7 minute read · Updated 2026-11-10

Manufacturer sizing charts provide only a starting baseline—true wick sizing must always be validated empirically in your finished formulation.

01. Why Sizing Charts Are Starting Points Only

Every reputable supplier publishes suggested wick-to-diameter charts. However, two identical 76 mm (3 in) jars filled with the same soy wax—one containing 8% crisp citrus oil and the other containing 8% dense vanilla-amber oil with dark pigment dye—frequently require completely different wick sizes.

Wick selection ALWAYS requires full burn testing with the actual wax, fragrance oil, dye, and vessel combination. Never rely on online guesswork alone.

Common mistakes

  • Choosing a wick size to force a full edge-to-edge melt pool on the very first 2-hour burn—which frequently leads to overheating and excessive flames in the bottom half of the jar.

Safety considerations

  • A modest rim hang-up during the first 1–2 burns often catches up cleanly in deeper burns as jar walls retain heat; sizing for burn #1 alone causes dangerous over-wicking.

Frequently asked questions

How deep should a healthy melt pool be?

Many testers observe target melt pools roughly 6–13 mm (1/4 to 1/2 in) deep during controlled 3–4 hour burns, though exact target behavior varies by wax blend and vessel height.

This page is part of the Pour Theory educational reference library. Verify all production settings against the current documentation for your specific wax, fragrance, wick, and vessel.