Pour TheoryUnderstand the Science. Master the Craft.

Wicks & Wick Selection

Wick Construction, Treatments & Primer Waxes

Behind every pre-tabbed wick lies braid engineering, mineral salt treatments that suppress afterglow embers, and high-melt primer wax coatings.

5 minute read · Updated 2026-10-27

Behind every pre-tabbed wick lies braid engineering, mineral salt treatments that suppress afterglow embers, and high-melt primer wax coatings.

01. Priming Coatings and Sustainer Neck Height

Raw braided cotton absorbs wax unevenly and collapses when lit. Commercial candle wicks are coated ("primed") in a high-melting-point wax so the wick stands upright while pouring and lights smoothly.

The stamped metal sustainer tab at the bottom anchors the wick and features a raised cylindrical collar ("neck height", commonly 3 mm to 10 mm). As the candle nears the bottom, the solid collar prevents the flame from burning directly onto the glass floor.

Common mistakes

  • Cutting raw spooled wick and crimping tabs loosely with standard pliers, allowing the wick to pull loose when the wax melts.

Safety considerations

  • Ensure sustainer tabs are rated for your vessel base and adhere with high-temperature wick stickers rather than standard hot-melt craft glue, which softens in hot wax.

Frequently asked questions

Why are some wicks chemically treated by manufacturers?

Food-safe mineral salt treatments reduce glowing ember afterglow when extinguished and optimize carbon burn-off in viscous plant waxes.

This page is part of the Pour Theory educational reference library. Verify all production settings against the current documentation for your specific wax, fragrance, wick, and vessel.