Pour TheoryUnderstand the Science. Master the Craft.

Diagnostic guide

Wet Spots (Glass Adhesion Gaps)

Wet spots are not liquid moisture or fragrance oil; they are optical patches where solidified wax has pulled slightly away from the interior glass wall, leaving a micro-gap that looks like a wet blotch from outside.

Visual appearance

Irregular, glossy-looking patches visible through clear glass jars where portions of the wax stick firmly while adjacent zones appear detached.

Common causes

  • Natural thermal contraction of wax as it cools and shrinks relative to rigid glass.
  • Pouring into cold glass vessels or cooling candles on cold granite/metal surfaces.
  • Ambient temperature swings during storage or shipping causing wax to expand and contract repeatedly.
  • Residual manufacturing film or dust inside uncleaned glass jars preventing adhesion.

Diagnosis steps

  • Tap gently or warm the outside of the jar slightly with your palm; if the optical patch shifts or shrinks temporarily, it confirms an adhesion gap rather than trapped liquid.
  • Check if wet spots appear symmetrically or predominantly on the side facing an exterior wall or draft.

Corrective actions

  • Wipe clean glass vessels with isopropyl alcohol and allow complete evaporation prior to wicking.
  • Pre-warm jars gently (e.g., to ~30–35°C) before pouring so glass and wax cool together smoothly.
  • Cool poured candles on insulated cardboard, cork, or wood racks spaced at least 5 cm (2 in) apart.
  • Experiment with softer container wax blends engineered for higher glass adhesion, or switch to opaque ceramic/amber glass vessels.

What to test next

  • Compare room-temperature jars vs pre-warmed jars cooled under an insulated cardboard cover over a 48-hour cycle.

Prevention

  • Recognize that seasonal temperature shifts during retail shipping frequently trigger wet spots in clear glass—transparently educate customers or choose frosted/opaque vessels if uniform appearance is critical.

Safety considerations

  • Wet spots are purely cosmetic and do not affect burn safety; never overheat jars with open flames or uncontrolled heat guns trying to melt them out.