Pour TheoryUnderstand the Science. Master the Craft.

Production Techniques

Wick Placement & Centering Techniques

A wick drifting even 4–5 mm off center can overheat one jar wall and cause uneven burning throughout the candle’s life.

4 minute read · Updated 2026-10-18

A wick drifting even 4–5 mm off center can overheat one jar wall and cause uneven burning throughout the candle’s life.

01. Floor Adhesion & Top Tension

Press a high-temperature foam or acrylic wick sticker onto the clean dry sustainer tab, position it precisely at the center of the clean jar floor using a setting tube, and press firmly for 5–10 seconds.

After pouring, pull the wick taut (without tearing it off the floor) and lock it into a rigid wick centering bar until the wax cools completely solid.

Common mistakes

  • Using standard craft glue sticks or low-temp hot glue that melts loose once the candle burns near the bottom.

Safety considerations

  • A drifting wick tab near the end of a candle’s life can press hot flame directly against side glass and crack the vessel.

Frequently asked questions

How do makers center multi-wick jars consistently?

Laser-cut acrylic or 3D-printed vessel-specific centering jigs dropped into the jar guarantee identical tab coordinates across every batch.

This page is part of the Pour Theory educational reference library. Verify all production settings against the current documentation for your specific wax, fragrance, wick, and vessel.