Pour TheoryUnderstand the Science. Master the Craft.

Production Techniques

Preparing & Cleaning Containers

Factory glassware often carries microscopic release oils or cardboard dust that undermine wick sticker adhesion and encourage wet spots.

4 minute read · Updated 2026-10-18

Factory glassware often carries microscopic release oils or cardboard dust that undermine wick sticker adhesion and encourage wet spots.

01. Inspection, Alcohol Wipe & Pre-Warming

Inspect every container under bright light for hairline cracks, sharp burrs, or uneven bottoms. Wipe interior walls and floor with 70–99% isopropyl alcohol on a lint-free microfiber cloth, and allow complete evaporation so zero moisture remains before applying wick stickers.

In cold studios (< 18°C / 65°F), gently warming empty jars moderately before pouring eases thermal shock and improves glass adhesion.

Common mistakes

  • Washing jars with dish soap and drying hastily with linty towels that leave surfactant film or fibers inside.

Safety considerations

  • Allow isopropyl alcohol vapors to dissipate fully away from open flames or hot burners before pouring.

Frequently asked questions

Can I warm jars in an oven before pouring?

Avoid high oven temperatures; gently warming with a controlled heat box or warm water bath prevents exceeding safe glass handling temperatures.

This page is part of the Pour Theory educational reference library. Verify all production settings against the current documentation for your specific wax, fragrance, wick, and vessel.