Pour TheoryUnderstand the Science. Master the Craft.

Production Techniques

Pouring Technique & Temperature Control

Controlled pouring speed, pitcher height, and TDS-guided temperatures set the stage for smooth solidification.

5 minute read · Updated 2026-10-21

Controlled pouring speed, pitcher height, and TDS-guided temperatures set the stage for smooth solidification.

01. Steady Laminar Pouring

Allow mixed wax to cool gently to the pouring window specified on your wax TDS while stirring lightly every few minutes to maintain uniform temperature. Hold the pitcher spout close to the vessel rim and pour in a slow, steady stream down toward the center without splashing wax onto upper glass walls.

If minor bubbles appear right after pouring, tap the side of the jar lightly once on the benchtop before cooling begins.

Common mistakes

  • Pouring from high above the vessel, dragging air bubbles deep into cooling wax.

Safety considerations

  • Pour on a stable, level surface at comfortable height—never reach over hot vessels.

Frequently asked questions

Why do manufacturers give a pouring temperature range rather than one exact degree?

Studio ambient room temperature, jar wall thickness, and batch size affect cooling rate, so makers tune within the TDS range to suit their environment.

This page is part of the Pour Theory educational reference library. Verify all production settings against the current documentation for your specific wax, fragrance, wick, and vessel.