Pour TheoryUnderstand the Science. Master the Craft.

Fragrance & Formulation

Understanding Fragrance Load

Fragrance load defines how much scent oil a wax matrix carries—and distinguishing wax-weight calculation from total-batch percentage prevents costly formulation errors.

8 minute read · Updated 2026-11-11

Fragrance load defines how much scent oil a wax matrix carries—and distinguishing wax-weight calculation from total-batch percentage prevents costly formulation errors.

Fragrance formulation station with amber glass oil bottles, glass beaker on digital gram scale, thermometer probe, and formulation logbook
Fig. 2 — Weighing fragrance oil separately in a tared borosilicate beaker ensures repeatable ratios.

01. Wax-Weight Percentage vs. Total-Batch Percentage

In North American and craft candle supply conventions, "8% fragrance load" almost universally means 8% of the WAX weight: for 1,000 g of wax, you add 80 g of fragrance oil for a total batch weight of 1,080 g.

By contrast, in industrial chemical and cosmetic IFRA safety calculations, concentration is expressed as percentage of the FINISHED MIXTURE: 80 g ÷ 1,080 g = 7.41% of total batch weight. Understanding both definitions keeps you compliant with both wax TDS limits and IFRA maximum usage certificates.

02. Why Maximum Load Is Not Always Optimal

Maximum fragrance capacity is strictly governed by the wax manufacturer TDS and the fragrance supplier IFRA Category 12 document. Pushing up to the ceiling does not automatically guarantee stronger throw; excessive oil frequently clogs wick capillaries, causes carbon mushrooming, or seeps out onto the surface.

Practical example

title

Comparing Both Calculation Methods on a 500 g Pour

scenario

Target: 500 g total finished mixture vs. 500 g base wax at a 10% load.

steps

  • Wax-Weight Convention (10% of Wax): 500 g wax + (500 × 0.10 = 50 g fragrance) = 550 g total batch (9.09% of total mix).
  • Total-Mixture Convention (10% of Total 500 g Batch): Wax = 500 ÷ 1.10 = 454.55 g; Fragrance = 45.45 g.

Common mistakes

  • Assuming every fragrance oil performs best at 10–12% rather than testing 6%, 8%, and 10% side by side.
  • Confusing IFRA total-mixture caps with wax-weight load formulas.

Safety considerations

  • Never exceed the LOWER of either the wax manufacturer maximum load or the fragrance IFRA Category 12 ceiling.

Frequently asked questions

If my wax says max 10% fragrance load, does every scent work at 10%?

No. Heavy vanillas or dense wood accords may clog wicks or sweat at 10%, whereas an optimized 7–8% load often burns cleaner with superior hot throw.

This page is part of the Pour Theory educational reference library. Verify all production settings against the current documentation for your specific wax, fragrance, wick, and vessel.