Pour TheoryUnderstand the Science. Master the Craft.

Production Techniques

Adding Fragrance Oil at the Right Temperature

Adding fragrance too cool prevents clean binding; adding too hot flashes off volatile notes—always match your specific wax TDS.

5 minute read · Updated 2026-10-20

Adding fragrance too cool prevents clean binding; adding too hot flashes off volatile notes—always match your specific wax TDS.

01. Following Manufacturer TDS Windows

Different waxes dissolve fragrance cleanly at different temperatures depending on melting point and emulsifier content. Consult your exact wax Technical Data Sheet rather than relying on universal internet numbers.

Pour pre-weighed fragrance oil slowly down the side or into the center of the pitcher while stirring gently so oil disperses smoothly without splashing.

Common mistakes

  • Adding fragrance oil immediately upon removing wax from heat without checking probe temperature first.

Safety considerations

  • Note the fragrance SDS flash point for workspace fire awareness, though flash point does not prohibit mixing above that temperature inside wax when no open spark is present.

Frequently asked questions

Does adding fragrance above its flash point ruin the scent?

Flash point is an ignition vapor safety metric, not an instant evaporation cliff—however, needlessly excessive temperatures accelerate top-note loss.

This page is part of the Pour Theory educational reference library. Verify all production settings against the current documentation for your specific wax, fragrance, wick, and vessel.