Pour TheoryUnderstand the Science. Master the Craft.

Wax encyclopedia

Paraffin Wax

A refined hydrocarbon wax composed of straight-chain n-alkanes, prized for smooth shrinkage release in molds, saturated dye vibrancy, and efficient fragrance volatilization.

Origin and material

Paraffin wax is derived from petroleum refining (dewaxing lubricating oil fractions) and undergoes hydrotreating and filtration to yield food-grade or candle-grade fully refined alkanes. Container paraffin grades typically retain a slightly higher oil content or include microcrystalline modifiers for jar adhesion, while pillar and votive grades are harder and higher-melting.

General characteristics

  • Translucent to semi-opaque white solid with clean, non-greasy crystalline structure when fully refined.
  • Available across a wide range of melt points tailored separately to containers, pillars, tapers, and dipped candles.
  • Lower melt viscosity than natural vegetable triglycerides, facilitating capillary flow up braided wicks.
  • Predictable volumetric contraction upon cooling, which aids mold release in pillar and votive production.

Typical applications

  • Free-standing pillar candles, molded tapers, and votives (higher-melt grades).
  • Highly scented container candles (low-melt container grades or petrolatum-modified grades).
  • Blended wax systems (paraffin-soy or paraffin-coconut) to stabilize surface finish and scent throw.

Advantages

  • Strong cold and hot fragrance projection due to low viscosity and clean hydrocarbon polarity.
  • Accepts liquid and block candle dyes cleanly without polymorphic frosting.
  • Consistent batch-to-batch behavior and tight melt-point specifications from refiners.
  • Clean release from metal, polycarbonate, and silicone molds when hard pillar grades are used.

Limitations

  • Derived from non-renewable petroleum feedstock, which some customer segments avoid.
  • Higher shrinkage means pillars and many container grades require a second pour ("repour") to fill central sinkholes unless blended.
  • Over-wicking or burning in drafts can produce visible black carbon soot more readily if flame equilibrium is exceeded.

Compatibility considerations

Because molten paraffin has relatively low viscosity, it pairs well with tighter, smaller-gauge braided cotton wicks compared to soy wax of the same vessel diameter. Additives such as Vybar, stearic acid, or microcrystalline wax dramatically change hardness, opacity, and fragrance binding capacity.

Fragrance considerations

Unmodified high-melt pillar paraffin often has a low natural oil-retention ceiling (causing oil sweating if overloaded) unless paired with an appropriate polymer additive or formulated specifically as a high-load container paraffin. Never exceed the manufacturer TDS fragrance limit.

Pouring and processing

Follow the manufacturer TDS for exact melt and pour temperatures. Container paraffins are frequently poured warmer than soy to promote smooth jar adhesion, while pillar paraffins often require a planned second pour after the core cools and contracts.

Storage guidelines

Store slabs or pastilles in dry, cool conditions out of UV exposure, which can slowly oxidize and yellow unstabilized paraffin over long periods.

Common problems

  • [object Object]
  • [object Object]
  • [object Object]

Frequently asked questions

Is candle-grade paraffin safe to burn indoors?

When properly refined, formulated, and burned in accordance with ASTM safety standards and draft-free conditions, peer-reviewed emission studies cited by the National Candle Association show paraffin candles burn safely well below health threshold limits.

Can paraffin and soy be blended in-house?

Yes, makers frequently blend specific ratios (e.g., parasoy), though pre-blended commercial parasoy formulations often offer superior consistency and manufacturer TDS documentation.