Pour TheoryUnderstand the Science. Master the Craft.

Containers & Equipment

Candle Molds: Silicone, Polycarbonate & Aluminum

Mold rigidity and thermal conductivity govern pillar surface gloss, crystal formation, and ease of demolding.

5 minute read · Updated 2026-10-24

Mold rigidity and thermal conductivity govern pillar surface gloss, crystal formation, and ease of demolding.

01. Matching Mold Material to Wax Chemistry

Seamless spun aluminum molds conduct heat rapidly and produce satin-smooth traditional pillars using high-shrinkage paraffin or beeswax. Clear polycarbonate molds offer crisp glassy gloss and let you inspect bubbles, though fragrance oils can slowly cloud polycarbonate if left sitting.

Platinum-cure silicone molds excel for intricate geometric or sculptural shapes that cannot release from rigid shells.

Common mistakes

  • Pouring soft container soy wax into intricate silicone molds where delicate edges snap off during demolding.

Safety considerations

  • Check maximum heat rating of plastic/polycarbonate molds before pouring high-temperature palm or beeswax.

Frequently asked questions

How do you seal the bottom wick hole on an open aluminum pillar mold?

Use dedicated reusable mold putty or high-temp aluminum foil tape pressed firmly around the threaded wick pin or braided wick before pouring.

This page is part of the Pour Theory educational reference library. Verify all production settings against the current documentation for your specific wax, fragrance, wick, and vessel.